Megadeth

Tornado of Souls guitar tone settings.

Rust In Peace · 1990 · Metal

Explore Tornado of Souls by Megadeth: an example rig, amp settings and playing tips. Adapt the reference to your own supported gear with Amper.

Rust In Peace — Megadeth album artwork — Album artwork · Megadeth / Apple Music ↗

RECREATION

Lead guitar

Focused lead sustain with a restrained echo.

In your hands

Keep fast runs clean and let bends resolve accurately.

Evidence and sources

Amper practice recreation for the named guitar part or arrangement. Gain, EQ, pickup and effect choices are authored starting points, not documented artist settings or a verified recording rig. No track-specific recording evidence is claimed for this profile. Listening validation on physical gear is pending.

Reference tone

FREE TO EXPLORE

An authored example rig, not your matched settings or a documented artist preset.

RG421→DD-8 Digital Delay→5150 Iconic 40W 1x12

guitar · Ibanez

RG421

5-way selector (bridge to neck)Bridge humbuckerWhy this setting?

Suggested pickup position for this part; a tonal choice, not a claim about the original session.

Volume10Why this setting?

Suggested volume position for this part. Compare at equal listening volume and adjust by ear.

Normalized knob travel 0-10. Guitar output.

Tone8Why this setting?

Suggested tone position for this part. Compare at equal listening volume and adjust by ear.

Normalized knob travel 0-10. Master treble roll-off.

pedal · BOSS

DD-8 Digital Delay

E.Level2Why this setting?

Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.

Normalized knob travel 0-10. Effect level; mode-dependent.

Feedback3Why this setting?

Begin with restrained repeats; reduce if echoes build up.

Normalized knob travel 0-10. Repeat regeneration; mode-dependent.

Time3Why this setting?

Approximate knob travel only, not milliseconds. Adjust timing to the phrase by ear.

Normalized knob travel 0-10. Delay time; range depends on mode and tap division.

ModeStandardWhy this setting?

Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.

CarryoverOffWhy this setting?

Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.

Pedal switchEffect onWhy this setting?

Use a normal short press; check the indicator. Do not hold for tap, looping or special gestures.

Effect switching, tap tempo, Warp/GLT gestures or looper transport depend on mode.

Use mono INPUT A and OUTPUT A, Standard mode, and the ordinary effect on/off press. Match delay timing by ear; do not use Loop, Warp or GLT for this plan.

amp · EVH

5150 Iconic 40W 1x12

Channel selectChannel 2 (red)Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Connected footswitch overrides the panel button.

Channel 2 Gain7Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 high-gain preamp drive.

Channel 2 BurnOffWhy this setting?

Use the normal high-gain voicing; Burn is not required by the stored profile.

Heavier/thicker channel 2 distortion.

Channel 2 Noise Gate2Why this setting?

Start low and raise only enough to suppress idle noise without cutting sustained notes. Works on channel 2 only.

Normalized 0-10 noise suppression; channel 2 only, not a measured dB threshold.

Low4Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 shared passive low-frequency EQ.

Mid7Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 shared passive middle-frequency EQ.

High7Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 shared passive high-frequency EQ.

Channel 2 Volume2Why this setting?

Start at minimum, then raise gradually for your room; this is output level, not gain.

Normalized 0-10 post-preamp output level.

Reverb0Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 global post-loop reverb level.

Resonance4Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 power-amp low-frequency response through damping.

Presence7Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Normalized 0-10 power-amp ultra-high-frequency response through damping.

Power level1/4 (10 W)Why this setting?

Editorial starting point for this section; compare at equal listening volume and adjust by ear.

Use the normal instrument input and the connected combo speaker. Leave speaker wiring and load impedance matched to the actual load; they are not song settings. Follow the manual for power/standby operation.

With no footswitch connected, select the indicated channel on the panel. If using the included footswitch, select the channel there and leave Boost off; it overrides the panel selector and adds input gain even when Boost Volume is at zero.

This plan uses the audible combo speaker with Power Amp Mute off, and no effects-loop connections. Start channel Volume at minimum and raise gradually; the 10 W setting can still be loud.

Know the limits

Editorial recreation; these settings have not been listening-tested on your setup.
Pickup output, speakers, room, and studio layering remain differences; the numeric mapping is not an acoustic calibration.
The song profile has no exact delay time, subdivision or repeat count. Delay settings are approximate and need adjustment by ear.
The displayed chain uses the amp input. Delay/reverb before an overdriven preamp will sound different from a post-drive studio effect; start with a low mix.

These are Amper recreation settings, not the artist’s exact knob positions. The example rig translates this named part’s stored gain, EQ, pickup and effect targets into verified hardware controls. Amper practice recreation for the named guitar part or arrangement. Gain, EQ, pickup and effect choices are authored starting points, not documented artist settings or a verified recording rig. No track-specific recording evidence is claimed for this profile. Listening validation on physical gear is pending.