Foo Fighters
The Pretender guitar tone settings.
Echoes, Silence, Patience & Grace · 2007 · Alternative
Explore The Pretender by Foo Fighters: an example rig, amp settings and playing tips. Adapt the reference to your own supported gear with Amper.
Artwork unavailableHeavy rhythm
Dense, defined rock distortion.
In your hands
Keep chord attacks synchronized and avoid low-end build-up.
Evidence and sources
Amper practice recreation for the named guitar part or arrangement. Gain, EQ, pickup and effect choices are authored starting points, not documented artist settings or a verified recording rig. No track-specific recording evidence is claimed for this profile. Listening validation on physical gear is pending.
An authored example rig, not your matched settings or a documented artist preset.
guitar · Gibson
Les Paul Standard '60s
3-way toggleWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Neck volumeWhy this setting?
Set pickup output here. Both volumes stay available so the middle selector position is not accidentally muted.
Normalized knob travel 0-10. Neck pickup output.
Bridge volumeWhy this setting?
Set pickup output here. Both volumes stay available so the middle selector position is not accidentally muted.
Normalized knob travel 0-10. Bridge pickup output.
Neck toneWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Neck treble roll-off.
Bridge toneWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Bridge treble roll-off.
amp · Mesa/Boogie
Dual Rectifier Multi-Watt
Rear channel selectorWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
CH3 modeWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
CH3 GainWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Channel preamp drive.
CH3 TrebleWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Channel high EQ.
CH3 MidWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Channel middle EQ.
CH3 BassWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Channel low EQ.
CH3 PresenceWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Normalized knob travel 0-10. Channel high response; behavior depends on selected mode.
CH3 MasterWhy this setting?
Start with output at minimum, then raise toward this low starting position to suit your room; knob position is not loudness.
Normalized knob travel 0-10. Channel output.
CH3 Multi-WattWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
CH3 Rectifier SelectWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Loop AssignWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Main Power voicingWhy this setting?
Editorial starting point, not a measured reproduction. Compare at equal listening volume and adjust by ear.
Select the indicated channel on the rear selector, not FTSW. Use Loop Bypass and connect pedals to the front input. Output and Solo are inactive: begin with the active channel Master fully down and raise it cautiously. Only the selected channel settings are shown.
Know the limits
- Editorial recreation; these settings have not been listening-tested on your setup.
- Pickup output, speakers, room, and studio layering remain differences; the numeric mapping is not an acoustic calibration.
- This plan uses full humbuckers; a single-coil reference remains a pickup-type compromise.
- Rectifier channel/mode, EQ and presence interact; these positions are a starting point, not a calibrated match.
These are Amper recreation settings, not the artist’s exact knob positions. The example rig translates this named part’s stored gain, EQ, pickup and effect targets into verified hardware controls. Amper practice recreation for the named guitar part or arrangement. Gain, EQ, pickup and effect choices are authored starting points, not documented artist settings or a verified recording rig. No track-specific recording evidence is claimed for this profile. Listening validation on physical gear is pending.